|Power on||Blue LED flashes 2 times|
|Power off||Red LED flashes 2 times|
|Pairing||Red LED & Blue LED flashes alternately|
|Standby||Blue LED flashes 3 times in 5 seconds|
|Incoming call||Blue LED flashes continuously|
|Low battery||Red LED flashes 2 times every 2 seconds|
|Charging||Red LED keep lighting during chargingBlue LED flashes once charging finished|
2, Basic Buttons Operation
Power on: Press multifunction button for 2 seconds. Blue LED flashes 2 times. Headphone turns on.
Power off: Press multifunction button for 3 seconds. Red LED turn off after flashes 2 times. Headphone turns off.
Volume adjust: Each press on ‘Volume up’ or ‘Volume down’ buttons, one level voice volume changes. When volume reaches to Max or Minimum, “Tick” reminding voice occurs.
Play/Pause: Short press multifunction button, music pause. Press it again, music continues.
Previous: Short press ‘Previous’ button, music turns to previous one.
Next: Short press ‘Next’ button, music turns to next one.
Answer Call: Short press multifunction button to answer phone call.
End call: Short press multifunction button, phone call ended.
Reject call: Press ‘Volume up’ button for 2 seconds to reject a call.
Transfer call: During the phone call conversation, press ‘Volume up’ button for 2 seconds, call switches to mobile phone. Press ‘Volume up’ button, for 2 seconds again, call switches to headphone.
Last number redial: In standby status, continuously press headphone multifunction button twice to redial the last number.
Call Mute function: Press ‘Volume down’ button for 2 seconds, call mute. Press ‘Volume down’ button for 2 seconds again, call mute cancel.
Battery Capacity status: When headphone connects to iOS devices, iOS devices show the headphone battery power status on the upper right corner.
Charging: New headphone has enough power for pairing and dialing out for several times. When in low battery, please charging via USB cable for 2 hours. Red LED keep lighting during charging, blue LED keep lighting, charging finished.
Reset Mode: Connect the headphone to computer via Micro USB cable. When red LED light flashes, headphone reset finished.
3, Pairing (One headphone support connecting 2 phone devices )
Pairing with one phone or other device
Press and hold the multifunctional button for 5 seconds to enter pairing mode. The Red and Blue LED flashes alternately. Turn BT ”on” and select the headset from your BT list to complete the pairing process. If your device requests a “PIN” for Headset, input”0000”
Pairing with two phones or other devices at the same time
The eHT-3 Headset can be paired to two devices at once. After pairing with the first device, put the Headset into pairing mode and connect to the second device. When turning the Headset on, it will automatically connect to the last connected device. Perform a short press of the “Volume Up” and “Volume Down” buttons simultaneously to connect to the other device. You may need to reselect the Wireless Headset in the second device’s BT list.
1, 1 X Stereo Wireless headphone eHT-3
2, 1 X Charging Micro USB Cable
3, 1 X User Manual
1, you must choose a qualified charger from a regular manufacturer to charge the headphone.
2, you must charge the headphone if it has not been used for more than 12 months.
3, Keep the headset away from extreme heat, moisture, or pressure.
4, Do not strike or drop the Headset.
Talk time: 10h
Stand-by time: 400h
Music play time: 10h
Wireless range: 10m
Wireless profiles: A2DP/ AVRCP/ HSP /HFP
Sound pressure level: 103±3dB
Frequency Response: 20Hz—20 KHz
Dimension: 175 x 154 x 63mm
هدفون - میکروفون
20هرتز تا 20 کیلوهرتز